We are the first choice for Wire Harness processing. We have Automotive Wire Harness on sale and have many years of production experience. If you are interested, you can consult us. Next, I will briefly introduce the common sense of wire harness processing. The application common sense of wire harness processing is as follows: 1: The wire is stained with tin Once the Electrical Wiring Harness wire is stained with tin, it may cause PVC to shrink when heated. When encountering such a situation, it is necessary to choose temperature-resistant PVC, and to control the time of sticking to tin not to be too long. 2: How to do CABLE line reliability test Generally, it is necessary to do swing, lifting, and conduction performance tests. General swing test conditions: parameters such as swing frequency, hoisted load, and the minimum number of swings required. The conditions for the lifting test include three parameters: the load of the lifting, the time of lifting, and the displacement size after lifting. 3: The label is not sticky If the label is not sticky, you can stick it on a clean metal surface without touching the non-drying adhesive surface with your hands directly, and then stick it on the wire one by one. 4: The tension is not enough after crimping If the pulling force cannot be reached, you can choose to find the reason from the following aspects: whether the crimping range of the terminal and the wire conductor is suitable; the material of the blade and its structure design; the material of the terminal, etc. 5: The terminal is detached from the PIN when wearing the plastic shell It often happens that the terminal comes off the PIN when wearing the rubber shell, so how do we solve it? In fact, it only needs to have a pull-back action every time it is inserted into a hole. The above is a brief introduction, if you want to know more about Automotive Wire Assembly, please contact us, we look forward to hearing from you.